The Hickman Edge Systems Drip Edge Fascia is an easy to install, tested and warranted system that acts as the roof’s first line of defense against wind and water infiltration. The system consists of a formed 20 Ga. Galvanized cleat, formed fascia cover and hidden 4 in. splice plates. Fascia covers are available in .040-in. or .050-in. Kynar 500 aluminum or 24 Ga. Kynar 500 coated galvanized steel. OMG Drip Edge Fascia comes in 10-ft. lengths and with face sizes from 3-in. to 13-in. high to accommodate most building designs.
Request a Quote
Includes 20-year Excel Warranty for wind speeds up to 110 mph
Inside and outside miters and end-caps are available as standard accessories along with pre-notched for radius applications. Standard fascia miter leg lengths are 24-in. nominal. Standard fascia miter angle is 90°, and custom miter angles are also available. In addition, the system is available in TPO and PVC clad metal for easy application on thermoplastic membrane roof systems.
Drip Edge is formed from .050-in. or .063-in. aluminum and 22 Ga. or 24 Ga. Kynar 500® coated galvanized steel. Fascia and cleat will be in 10-ft. lengths.
Please note that these calculations are based on U.S. measurements and roofing practices, and may not be sufficient or applicable for use outside of North America.